AL130W-Jiangsu Holi Weighing Equipment Co., Ltd.

Specifications
Parameter		Value				Units
Rated capacity (Emax)		40 / 50 / 100 / 200				kg
Accuracy class		C3	C3MR	C5	C6
Maximum number of LC intervals (nmax)		3000	2*3000	5000	6000
Min. LC verification interval (vmin)		Emax/5000	Emax/10000			g
Temp. effect on zero balance		± 0.0028	± 0.0014			% of Emax/℃
Zero balance		± 0.1				mV/V
Rated output		2.0				mV/V
Rated output tolerance		± 0.2				mV/V
Temp. effect on rated output +20…+40℃		± 0.00175	± 0.00175	± 0.00105	± 0.00087	% of AL/℃
-10…+20℃		± 0.00117	± 0.00117	± 0.0007	± 0.00058
Hysteresis error		± 0.0175	± 0.0175	± 0.0105	± 0.0105	% of Emax
Non-linearity error		± 0.0175	± 0.0175	± 0.0105	± 0.0105	% of Emax
Min. dead load output return		± 0.0166	± 0.0166	± 0.0100	± 0.0083	% of AL
Offer center load error（OIML R76）		± 0.0044	± 0.0044	± 0.0026	± 0.0022	% of AL/cm
Terminal resistance	Excitation	404 ± 15				Ω
	Output	350 ± 3				Ω
Insulation resistance @50VDC		＞2000				MΩ
Excitation voltage	Recommended	10				V AC/DC
	Maximum	15				V AC/DC
Temperature range	Compensated	-10 to +40				℃
	Operating	-10 to +50				℃
	Safe storage	-25 to +70				℃
Load limit	Safe	150				% of Emax
	Ultimate	300				% of Emax
Protection	Type	Silicone rubber over gage
	IP rating	IP65
OIML / European Approval	OIML Cert. No.	R60-2017-A-NL1-22.21
	European Cert. No.	TC11563
	Class	C6
	nmax	6000
NTEP Approval	Cert. No.	In application process for parrellel certification
	Class
	nmax
Cable	Length	1.5				m
	Type	4-wire, PVC
Construction		Aluminum
Maximum platform size		300 x 350 for 40 to 50kg; 400 x 500 for 50 to 200kg				mm
Recommended torque		10.0				N.m
Notes: The values for linearity, hysteresis and temp. effect on rated output are recommended values, the sum of these data meets the requirements according to OIML R60.